AquaDive Robotic Pool Vacuum

AquaDive is plug-and-play:

1. Charge the unit fully (4 hours for first charge)

2. Place AquaDive in the water

3. Press the power button

4. The robot will begin its default cleaning cycle

For app control, pair the robot via the Illuminex App. WiFi pairing requires a 2.4GHz network.

• Full charge takes ~4 hours

• Battery life: up to 2.5 hours of continuous cleaning

• Use the included USB Type-C charger

• Store the battery in a cool, dry location at 50% charge during off-season

AquaDive offers multiple cleaning modes via the app:

• Floor Only — Cleans the pool floor (fastest cycle)

• Floor + Walls — Includes wall scrubbing

• Full Clean — Floor, walls, and waterline

• Spot Clean — Targets a specific area

3D mapping technology scans your pool's shape and depth to create an efficient cleaning route.

Robot won't start:

• Check that the battery is charged

• Make sure water depth is sufficient (min 2 ft)

Robot stops mid-cycle:

• Check the filter basket — empty if full

• Inspect brushes and tracks for debris

Won't connect to WiFi:

• Confirm 2.4GHz network (not 5GHz)

• Reset network settings in the app and re-pair

• After every use: Empty and rinse the filter basket

• Weekly: Check brushes and tracks for debris

• Off-season: Store in a cool, dry place. Charge battery to 50%

• Annual: Inspect drive motors and seals — service if water has entered the unit

Use AquaDive 2–3 times per week during peak season.