AquaPump Automation Accessory

RS485 3-Wire Communication Cable

Communication cable for connecting compatible AquaPump Variable Speed pumps to supported external automation systems.

Required for supported Hayward RS485 automation configurations.

Confirm pump model and automation-system compatibility before installation.

SKU: LU-RS485VS3Type: RS485 · 3-Wire
RS485 3-wire communication cable for AquaPump Variable Speed
RS485 Automation Connection

3-Wire RS485 Communication Cable

SKU: LU-RS485VS3For: AquaPump Variable Speed

Designed to provide the communication connection required by supported AquaPump Variable Speed automation configurations.

Used for supported Hayward automation connections.

In Stock

Available for compatible AquaPump automation installations.

3-Wire RS485

Provides the required three-conductor communication connection for supported automation configurations.

AquaPump Compatible

Designed for compatible AquaPump Variable Speed models.

Automation Integration

Supports communication between the pump and a compatible external automation controller.

Automation Communication

Connects AquaPump to Supported Automation

The RS485 cable carries communication between the compatible AquaPump Variable Speed pump and an external automation controller.

When a supported connection is established and configured correctly, control can be handed over to the connected automation system.

What This Cable Does — and Doesn't

Provides a communication connection.

Does NOT add Wi-Fi or Bluetooth
Does NOT power the pump or change pump voltage
Does NOT increase horsepower or flow
Does NOT create schedules itself
Does NOT act as an automation controller
Does NOT replace the pump control panel

Compatible AquaPump Models

This cable is intended for the AquaPump Variable Speed family. Both models below are confirmed compatible based on the product record.

AquaPump Variable Speed 2.2 HP
Model: LU-VS220
✓ Verified Compatible
AquaPump Variable Speed 3.9 HP
Model: LU-VS390
✓ Verified Compatible

Supported Automation

Current AquaPump documentation specifically identifies this 3-wire RS485 cable for supported Hayward (and Jandy) automation configurations. The 2-wire cable is used for Pentair. Do not mix the two cable types.

Hayward Automation

3-Wire RS485 Configuration

Used with supported Hayward automation configurations as specified in the AquaPump Variable Speed manual. Exact controller compatibility must still be confirmed from approved documentation.

Jandy Automation

3-Wire RS485 Configuration

This 3-wire cable is the confirmed Jandy RS485 connection cable for compatible AquaPump Variable Speed pumps.

Pentair Automation

Uses 2-Wire Cable

Pentair automation uses the separate 2-wire RS485 cable (LU-RS485VS2). This 3-wire cable is not the Pentair cable.

Configuration Note

Supported Hayward installations require pump communication settings to be configured according to the current AquaPump manual so the pump recognizes the Hayward protocol.

How It Connects

Conceptual connection path only. Follow the approved AquaPump and automation-system wiring diagrams for installation.

Supported Hayward Automation
RS485 3-Wire Cable
AquaPump Communication Port
LU-VS220 / LU-VS390

Conceptual connection only — no terminal colours, pin numbers, or polarity are shown. Follow the approved AquaPump wiring diagram for the specific automation system.

Waterproof Connection

Secure the pump communication-port fitting according to the AquaPump manual to help prevent humidity or water ingress. Make sure the waterproof nut is properly tightened.

Which RS485 Cable Do I Need?

There are two different RS485 cable configurations. Confirm which one your automation system requires before ordering.

2-Wire RS485 Cable

For supported 2-wire automation configurations.

View 2-Wire Cable
You Are Viewing This Cable

3-Wire RS485 Cable

For supported 3-wire automation configurations, including approved Hayward connections.

SKU: LU-RS485VS3

Cable Details

Only confirmed information is shown. Cable length, wire gauge, connector pinout, and IP rating are not published unless verified in the product record.

Communication Type
RS485
Conductors
3-wire
SKU
LU-RS485VS3
Application
Supported AquaPump automation connections
Automation System
Hayward & Jandy (3-wire). Pentair uses the 2-wire cable.
Compatible Pump Models
AquaPump Variable Speed (LU-VS220, LU-VS390)

What's Included

Package contents come from the actual product record. No pump, controller, adapter, 2-wire cable, extension cable, or mounting hardware is shown unless actually included.

1 × RS485 3-Wire Communication Cable
SKU: LU-RS485VS3

Installation

Installation should follow the current AquaPump automation wiring diagram and the instructions for the connected automation system.

Disconnect power before accessing pump electrical or communication connections.

Request This Cable

Tell us about your AquaPump and automation system and we'll confirm availability and compatibility. Your request automatically references this product.

Related AquaPump Automation Accessories

Resources

Illuminex

Premium pool equipment and reliable solutions for homeowners, builders, sales centers, and distributors.

About IlluminexFor Pool Professionals

Contact

Illuminex Pool Products Inc.

Illuminex Pool Products Inc.254 Hopecrest RoadMarkham, Ontario L6C 2H5Canada
Illuminex Pool Products Inc. USA8 The Green, STE ADover, DE 19901United States
OTSFFCanadian Fulfillment (3PL)500 Edward Ave Unit 3Richmond Hill, Ontario L4C 4Y9Canada
Customer Service

© 2026 Illuminex Pool Products Inc. All rights reserved.

Illuminex Pool Products Inc. · 254 Hopecrest Road, Markham, Ontario L6C 2H5, Canada

Illuminex Pool Products Inc. USA · 8 The Green, STE A, Dover, DE 19901, United States