RS485 3-Wire Communication Cable
Communication cable for connecting compatible AquaPump Variable Speed pumps to supported external automation systems.
Required for supported Hayward RS485 automation configurations.
Confirm pump model and automation-system compatibility before installation.

3-Wire RS485 Communication Cable
Designed to provide the communication connection required by supported AquaPump Variable Speed automation configurations.
Used for supported Hayward automation connections.
3-Wire RS485
Provides the required three-conductor communication connection for supported automation configurations.
AquaPump Compatible
Designed for compatible AquaPump Variable Speed models.
Automation Integration
Supports communication between the pump and a compatible external automation controller.
Connects AquaPump to Supported Automation
The RS485 cable carries communication between the compatible AquaPump Variable Speed pump and an external automation controller.
When a supported connection is established and configured correctly, control can be handed over to the connected automation system.
What This Cable Does — and Doesn't
Provides a communication connection.
Compatible AquaPump Models
This cable is intended for the AquaPump Variable Speed family. Both models below are confirmed compatible based on the product record.
Supported Automation
Current AquaPump documentation specifically identifies this 3-wire RS485 cable for supported Hayward (and Jandy) automation configurations. The 2-wire cable is used for Pentair. Do not mix the two cable types.
Hayward Automation
3-Wire RS485 ConfigurationUsed with supported Hayward automation configurations as specified in the AquaPump Variable Speed manual. Exact controller compatibility must still be confirmed from approved documentation.
Jandy Automation
3-Wire RS485 ConfigurationThis 3-wire cable is the confirmed Jandy RS485 connection cable for compatible AquaPump Variable Speed pumps.
Pentair Automation
Uses 2-Wire CablePentair automation uses the separate 2-wire RS485 cable (LU-RS485VS2). This 3-wire cable is not the Pentair cable.
Configuration Note
Supported Hayward installations require pump communication settings to be configured according to the current AquaPump manual so the pump recognizes the Hayward protocol.
How It Connects
Conceptual connection path only. Follow the approved AquaPump and automation-system wiring diagrams for installation.
Conceptual connection only — no terminal colours, pin numbers, or polarity are shown. Follow the approved AquaPump wiring diagram for the specific automation system.
Waterproof Connection
Secure the pump communication-port fitting according to the AquaPump manual to help prevent humidity or water ingress. Make sure the waterproof nut is properly tightened.
Which RS485 Cable Do I Need?
There are two different RS485 cable configurations. Confirm which one your automation system requires before ordering.
3-Wire RS485 Cable
For supported 3-wire automation configurations, including approved Hayward connections.
Cable Details
Only confirmed information is shown. Cable length, wire gauge, connector pinout, and IP rating are not published unless verified in the product record.
What's Included
Package contents come from the actual product record. No pump, controller, adapter, 2-wire cable, extension cable, or mounting hardware is shown unless actually included.
Installation
Installation should follow the current AquaPump automation wiring diagram and the instructions for the connected automation system.
Disconnect power before accessing pump electrical or communication connections.
Request This Cable
Tell us about your AquaPump and automation system and we'll confirm availability and compatibility. Your request automatically references this product.


