2-Inch Multiport Sand Filter Valve
Replacement multiport valve for compatible Illuminex AquaCrystal sand filters using the 2-inch valve configuration.
Confirm your AquaCrystal filter model before ordering.

2-Inch Multiport Valve
Replacement operating valve for compatible AquaCrystal sand filter assemblies using the approved 2-inch multiport configuration.
2-Inch Valve
Designed for compatible AquaCrystal filters using the approved 2-inch multiport configuration.
6-Way Operation
Provides multiple operating positions for normal filtration and approved sand-filter service functions.
AquaCrystal Replacement
Replacement valve assembly for compatible AquaCrystal sand filter models.
Directs Water Through the Sand Filter System
The multiport valve directs water through the appropriate internal flow path for normal filtration and approved service functions on compatible AquaCrystal sand filters.
Current approved AquaCrystal documentation identifies functions including Filter, Backwash, Rinse, and Waste.
Multiport Valve Functions
Only approved valve positions are shown. Additional positions must come from the actual valve documentation.
For normal filtration operation.
Directs flow through the approved sand-filter backwash path.
Used as part of the approved post-backwash service process.
Routes water through the approved waste-flow configuration.
Compatible AquaCrystal Filters
This valve is categorized as a replacement part for the AquaCrystal sand-filter family. The models below are typical 2-inch configurations β exact replacement compatibility must be confirmed before ordering.
Valve port size alone does not prove replacement compatibility. Two filters can both use a 2-inch valve but still differ in tank-neck connection, valve body design, clamp arrangement, standpipe connection, or gasket design. Confirm the exact replacement-part relationship before ordering.
Multiport valves may differ in mounting, tank connection and internal configuration even when the plumbing size is the same. Confirm your filter model before ordering.
Have a 24-Inch AquaCrystal?
Check the model number before ordering. LU-SF24 uses the 1.5-inch valve configuration, while LU-SF24II uses the 2-inch configuration.
Do not choose by filter diameter β both are 24-inch filters. Check the filter model number on the label.
Where It Fits
Conceptual location of the multiport valve on a compatible AquaCrystal sand filter.
Conceptual product-location visual β refer to the current AquaCrystal filter manual and parts diagram for exact installation details.
Which Multiport Valve Do I Need?
There are two valve configurations. Check the filter model number β not just the diameter β to find the correct valve.
1.5-Inch Valve
Current AquaCrystal configurations:
- LU-SF19 β AquaCrystal 19-Inch Sand Filter
- LU-SF22 β AquaCrystal 22-Inch Sand Filter
- LU-SF24 β AquaCrystal 24-Inch Sand Filter
Subject to exact replacement-part verification.
View 1.5-Inch Multiport Valve2-Inch Valve
Current AquaCrystal configurations:
- LU-SF24II β AquaCrystal 24-Inch Sand Filter
- LU-SF31 β AquaCrystal 31-Inch Sand Filter
- LU-SF36 β AquaCrystal 36-Inch Sand Filter
Subject to exact replacement-part verification.
Always confirm the filter model. Valve size alone does not guarantee replacement compatibility. The two valves are not interchangeable.
Valve Details
Only confirmed information is shown. Port connection type, tank connection, standpipe connection, material, pressure rating, and handle type are not published unless verified in the product record.
Pressure rating is not published unless the valve itself has an approved rating. The complete-filter working pressure does not independently prove the replacement valve's component rating.
Depressurize Before Service
Turn off the circulation pump and fully relieve pressure from the filtration system before removing, installing or servicing the multiport valve.
Follow the current AquaCrystal filter instructions for valve installation, operation and service.
Never loosen or remove the valve while the tank is pressurized.
Do not change valve positions while the pump is running unless the current AquaCrystal manual specifically permits it.
When Should the Valve Be Serviced?
Visible Damage
Inspect the valve body, handle and connections for visible physical damage.
Difficult Selector Operation
If the selector no longer moves or operates normally, inspect the valve according to the current AquaCrystal service instructions.
Seal or Internal Wear
Service internal sealing components according to the approved valve parts information.
What's Included
Package contents come from the actual product record. No pressure gauge, sight glass, O-ring, spider gasket, clamp, handle, union fittings, or hardware is shown unless actually included.
The pressure gauge is a separate service part β it is not assumed to be included with this valve unless the backend package contents confirm it.
Confirm the Correct Multiport Valve
Find Your Filter Model
Locate the AquaCrystal model number on the filter label.
Confirm the Valve Configuration
Verify whether the filter uses the 1.5-inch or 2-inch multiport valve.
Match the Replacement
Confirm the model against the approved replacement-part record before ordering.
Request This Part
Tell us about your AquaCrystal filter and we'll confirm compatibility and availability. Your request automatically references this product.


